- 4 settings in forward, to be set up with the touch pad on the back side of the tool
– Slow mode to approach without impacting (hand tightening around 3.7 ft.lbs / 4-5 Nm)
– Fast mode to tighten wheels close to recommended torque without overtightening (around 50 ft.lbs / 70 Nm) - 50%: around 425 ft.lbs / 580 N
- 100% of maximum torque around 850+ ft.lbs / 1150+ Nm
- 1 setting @ full power in reverse 850+ ft.lbs / 1150+ Nm
- 5 bumpers all around the tool, 1 in front of the clutch housing
- Brushless motor
- 4 Front LED lights for dark spaces
- Single-hand Forward and Reverse operation plus Safety locking position
- Soft thermoplastic rubber grip
The CP8849 Series is to be used as a « snugging » tool to come close to the car manufacturer’s specified torque rating. The final tightening should be done with a calibrated torque wrench, this way, we ensure the end of over-tightening.
Torque results could vary greatly depending on the type of wheel and many other factors.
Similar Products
CP8528 Pack
Call for Pricing
⅜” spindle lock and keyless chuck
Max. torque: 24 ft.lb/34 Nm
P...
CP8828 Pack US
Call for Pricing
3/8” anvil with ring retainer
Max. torque: 150 ft.lb/205 Nm in ...
