| Aeration Type | Shallow |
|---|---|
| Brakes | Hydrostatic |
| Construction | Welded steel frame with cast crank and arm assembly. |
| Controls | Redundant operator presence bails, aeration start/stop bails and traction speed thumb wheels on handle. Tine length calibration, tine depth and forward hole spacing set and saved in InfoCenter. Bump stop, delayed or immediate drop switch, cruise control on/set/off switch, aerate or transport switch and optional LED light kit switch located on operator console. Ignition, tachometer on side console. Throttle and choke on engine. |
| Electrical System | 12-volt, 15 amp regulated charging alternator/generator. BCI Group No.: U1 battery, 300 cold cranking amps @ 0°F. Micro-processor logic control. |
| Engine | Kohler®, 2-cylinder, air-cooled, 23 hp (17.1 kW) gross, 19 hp (14.2 kW) net @ 3000 rpm, 41 cu-in. (674 cc) displacement. Dry, large capacity, replaceable element air filter. External spin-on oil filter, 2-quart (1.9-liter). |
| Fuel Capacity | 7.5 gallons (28.4 liter), gasoline. |
| Gauges/Instrumentation | InfoCenter™, tachometer. |
| Ground Clearance | 4.75″ (12.1 cm) |
| Height | Head Raised: 45″ (114.3 cm) Head Lowered: 36.5″ (92.7 cm) Handle Raised: 60.7” (153.0 cm) Handle Lowered: 47.5” (119.7 cm |
| Hydraulic System | Remote spin-on filter. 3.0- gallon (13.2 liter) capacity, Toro PX Extended Life hydraulic fluid. |
| Interlocks | Operator presence, clutch latch, traction neutral, coring head raise/lower.Clutch latch, traction neutral, coring head raise/lower. |
| Length | Handle Down: 116.3” (293.1 cm) Handle Raised: 91.8” (231.3 cm) |
| Number of Tine Heads | 6 |
| Operating Speed | Transport Speed: Forward: 0-4.5mph (0-7.2km/h) Reverse: 0-2mph (0-3.2km/h) Aerating: Forward: 0-2.5mph (0-4km/h) Reverse: 0-2mph (0-3.2km/h) |
| Operating Width (Working Width) | 50.12″ (127.3 cm) |
| Optional Accessories | LED Light Kit, Windrower Kit, Tire Scrapers, Rear Roller Kit, QuickChange® Tool |
| Tires | 20″ x 10″ – 10″, 2-ply, Smooth Tread |
| Track Width | 38.3″ (97.3 cm) |
| Traction Drive | Series-Parallel, closed loop, hydrostatic drive. 3WD, except it automatically switches to 2WD while in aeration mode and traveling in forward direction with coring head raised allowing a tighter turning radius. Electronically controlled variable displacement piston type pump. High-torque, low-speed wheel motor drive. |
| Weight | 1,642 lbs (744.7 kg) |
| Wheelbase | 44.5″ (113 cm) |
| Width | 50.12″ (127.3 cm) |
Similar Products
18 cu.ft. Topdresser 1800 (44225)
Call for Pricing
Controls
Hydraulic engage/disengage lever from operator’s con...
18 in. (46 cm) Power Clear® 518 ZR Gas Snow Blower (38474)
Call for Pricing
Auger Diameter
7 in / 17.8 cm
Auger System
Rubber Paddle, Power C...
21 cu.ft. ProPass™ 200 Series Topdresser (44701)
Call for Pricing
Conveyor Belt
One-piece vulcanized, self-tracking (no seams or stap...
21 cu.ft. ProPass™ 200 Series Topdresser (44751)
Call for Pricing
Conveyor Belt
One-piece vulcanized, self-tracking (no seams or stap...
21 in. (53 cm) 60V MAX* (10Ah) Electric Battery Power Clear® Self Propel Snow Blower
Call for Pricing
Adjustable Skids
No
Auger Diameter
8.5 in / 21.6 cm
Auger Syste...
21 in. (53 cm) 60V MAX* Electric Battery Power Clear® Self Propel Commercial Snow Blower Bare Tool (39922T)
Call for Pricing
Auger Diameter
8.5 in / 21.6 cm
Auger System
Power Curve® Rot...
21 in. (53 cm) 60V MAX* Electric Battery Power Clear® Self Propel Snow Blower Bare Tool (39921T)
Call for Pricing
Adjustable Skids
No
Auger Diameter
8.5 in / 21.6 cm
Auger Syste...
21 in. (53 cm) Recycler® High Wheel Push Gas Lawn Mower (21311)
Call for Pricing
Bagger Capacity
2.0 bushels
Blade Engagement
Zone Start
Blade T...