Air Filter	Remote mounted, heavy-duty 2-stage air cleaner with evacuator valve
Alternator	60 amps with electronic regulator
Battery	12V
Brakes – Front	Hydraulic Disc
Brakes – Rear	Hydraulic disc
Cargo Bed	Yes
Cargo Capacity	2,785 lbs. (1266 kg)
Clutch	7.5″ (19 cm) clutch and pressure plate
Cooling System	Liquid Cooled
Crated Model	No
Differential Lock	Manual engage rear differential lock
Displacement	950cc (58 ci)
Drivetrain	Diesel
Frame	Steel space frame front frame and C-channel rear frame.
Fuel / Power Source	Diesel
Fuel Capacity	6 U.S. gal. (22.7 L)
Fuel Filter	Combination fuel filter/water separator with a 30 micron filtration and 50 mesh suction screen in tank.
Fuel Pump	Electronic pump
Gauges/Instrumentation	Fuel and coolant temperature gauges. Hour meter. Oil pressure, check engine and battery charge indicator lights. Tachometer and speedometer.
Ground Clearance	7″ (18 cm)
Height	Overall Top of ROPS: 75.8″ (192.5 cm)
High Speed Lockout	Interlock key switch that prevents engine from running in 3rd gear. Limits engine RPM to 2,200 in 3rd gear high range (HDX gas).
Horn	Standard
Hydraulics	4 gpm (15 lpm) gear pump provides hydraulic flow for power steering and lift in series. Lift control valve with quick disconnects for dual lift cylinders or for attachments when quick disconnects are switched. 8 quart total capacity.
Inside Turning Radius	100″ (254 cm)
Interlock	To start engine, clutch pedal must be depressed and remote hydraulic lever must be in neutral position. If installed, high flow hydraulics and rear PTO must be disengaged/switched off
Outside Turning Radius	300″ (762 cm)
Overall Width	64.7″ (164.3 cm)
Power Rating	23.3 hp (17.4 kW)
Power Steering	Yes
Power Train (Engine Description)	Kubota® 902D, 3-cylinder, inline vertical, 4-cycle, liquid cooled, counterbalanced diesel engine. Full pressure lubrication with spin-on oil filter. Meets EPA Tier IV compliance. Biodiesel ready for use up to B-20.
Product Length	Overall w/o Bed: 127.6″ (324 cm) Overall w/ Full Bed: 130″ (330 cm)
Rear Draw Bar	Standard
Rear Draw Bar Description	Steel hitch bracket bolted to rear DeDion axle. Mounting plate provides mounting hole for pin or ball hitch and incorporates two safety chain mounting holes. Maximum tongue weight of 600 lbs (272 kg). Trailers over 1500 lbs require trailer brakes.
Steering System Description	Hydraulic power steering with steering valve coupled to hydraulic cylinder with thru shaft. Maximum steering angle is 70 degrees on 2WD and 50 degrees on 4WD.
Suspension – Front	Independent system with dual “A” frame control arms, dual coil springs and dual shock absorbers with anti-sway bar.
Suspension – Rear	DeDion rear axle (weight carrying axle) suspension independent of transaxle with dual leaf springs and dual shock absorbers.
Suspension Travel – Front	5.75″ (14.6 cm)
Suspension Travel – Rear	3″ (7.6 cm)
Tires – Front	20″ x 9″ – 12″, 6-ply, Turf Tread
Tires – Rear	24″ x 12″ – 12″, 6-ply, Turf Tire
Total Vehicle Capacity	3,185 lbs. (1448 kg)
Towing Capacity	3,500 lbs. (1587 kg)
Traction Drive	Fully automatic on-demand, bi-directional system. Uses dual bi-directional clutches. In event of rear tire slippage, clutches transmit power proportionally to front wheel with highest traction.
Traction Drive (System)	4WD
Transmission	Rear transaxle directly connected to engine, twin axle drive. 3-speed synchromesh (forward speeds only), h-shift pattern with high-low range providing 6 forward speeds and 2 in reverse. Transmission housing doubles as hydraulic reservoir with outlet screen and external filter.
Vehicle Configuration	Standard
Vehicle Type	Heavy Duty
Weight	w/o Fuel: 2,015 lbs. (916 kg)

CP2042

Call for Pricing

Similar Products

CP7600xC-R4P

CP1117P32

CP3030-325AFR

CP3650-075AB

CP9356NS

CP86501 US

CP7739

CP7300R Kit